1.0 To 2.76 Mm Intermediate RBD Wire Annealing Machine
Main Features
Annealing mechanism
The annealing machine adopts the principle of DC short-circuit
heating. In order to prevent the wire from oxidation in the heating
process, we use steam to protect it in the working process.
Annealing consists of the following parts:
(1) Preheating section: before annealing and heating, the wire rod
shall be heated to a certain temperature in advance to prevent the
sudden heating of the material from affecting and changing the
material.
(2) Annealing section: the preheated wire heats the wire to 520 ℃ -
580 ℃ through the annealing section. Here, we change the annealing
heating temperature by adjusting the DC voltage of annealing, not
by directly adjusting the annealing temperature. We change the
annealing softening degree by changing the annealing voltage.
(3) Cooling section: when the material is heated to the specified
temperature, it will be cooled down immediately in the cooling
section. In the process of high temperature and rapid cooling, the
crystals inside the material will be rearranged to soften. Water is
used for cooling, so the temperature of cooling water for annealing
shall not be too hot, otherwise poor cooling will affect the
annealing effect.
(4) Drying section: it is used to dry the moisture on the wire
surface. The principle is the same as preheating. It is
short-circuit heating with DC voltage.
(5) Blow dry: forced blow dry with compressed air.
Technical Parameters
| Machine Specs | ZDL350B |
| Max input diameter (mm) | 3.0 / 3.5 |
| Output wire diameter (mm) | 1.0 to 2.76 |
| Max dies No. | 9 |
| Max wire speed (m/min) | 1200 |
| Main power (kw) | 55 |
| Dual-reel bobbin size (mm) | 500 - 630 |
| Max take up speed (m/s) | 25 |
| Take up motor (kw) | 15 |
| Max annealing speed (m/s) | 20 |
| Max tension (N) | 138 |
| Noise (db) | Less than 80 |
| Air pressure (MPa) | 0.6 |
| Air volume (m³/min) | 1.0 |
| Power supply (V) | 415 (+/-15) |
| Frequency (Hz) | 50 / 60 |
Download Center
Intermediate
RBD Wire Drawing With Double Spool Ta...
Note: Please click above link to download our detailed machine
technical specifications.
Manual of Machine Purchase
Packing,
Shipping, Quality & Service, FAQ etc.pdf
Our Company
Dongguan Wiremac Machinery Equipment Co., Ltd. Is located in Houjie
Town, a famous historic town in China. Our company is a wire and
cable equipment manufacturer integrating R&D, processing,
assembly, commissioning and after-sales.
The company is committed to copper wire, copper clad steel, copper
clad aluminum and other metal wire deep processing and research,
with a variety of high quality machines: micro wire drawing
machine, fine wire drawing machine, fine wire drawing machine with
continuous annealing, medium fine wire drawing machine,
intermediate wire drawing machine, intermediate RBD wire drawing
machine and copper rod breakdown machine.
Our company provides a complete set of wire processing solutions
for customers, but also customize and design non-standard special
equipment according to the requirements of customers.
Our company upholds the spirit of “Honesty-based, Quality-based”
enterprise, and continue to research and develop innovation and
development, with professional skills and standardized pragmatic
management, in line with the “High-quality and High-efficiency”
business philosophy, from the overall planning, staff training,
installation and commissioning, after-sales service, to provide
customers with better and more satisfactory products and service.
Our Workshop
FAQ
1. Q: Are you manufacturer or trading company?
A: We are a manufacturer.
2. Q: What info you need before you make the proposal?
A: The input & output wire diameter, spool size, application, 3
phase voltage & frequency, annealing or not, and your other
requirement.
3. Q: How can I trust you and make a payment to you?
A: (1) We are an audited supplier by international SGS, with its
certificate. They approve that we are an original manufacturer and
meet their standard.
(2) We are a member of Made in China, who is always responsible for
all customers.
(3) Please visit us and check our factory by video, and request
necessary documents from us.
4. Q: I have no experience buying something abroad. What can I do?
A: We will guide and show you how to do the importation, you can
also seek help from your local agency.
5. Q: Do you provide installing and debugging overseas?
A: Overseas machine installation and worker training services are
available.
6. Q: Can you make the machine according to my design or prototype?
A: Yes, we have an experienced team for working out the most
suitable design and production plan for the machine that you are
going to book with us.
7. Q: How does your factory do regarding quality control?
A: There is zero tolerance to poor quality. Quality control
complies with SGS & ISO 9001. Every machine has to past testing and
trial running before it's packed for shipment.
8. Q: How can I trust you that machines pasted testing and trial
running before shipping?
A: 1) We record the testing videos for you, and every necessary
photos for you.
2) We welcome you to visit us and test machine by yourself in our
factory.
9. Q: What about our after-sale service?
A: We provide technical support on line as well as overseas
services by skillful technicians.
10. Q: What should I do if I just start a new business?
A: Contact us immediately, we provide free consultant pre-sales
service. Also we can help you with material purchase, worker
training, etc.
11. Q: Can I visit you factory to check machines on-site? What
Should I bring when I visit your factory?
A: We are manufacturer, and welcome customers to visit us. For
special product design, you are suggested to bring some samples,
you can test it with our machines on-site.
12. Q: Can I use my own logo?
A: No problem, please inform us.
