If there are defects in the copper wire rod, the corresponding
countermeasures shall be taken in time according to the production
conditions of the copper wire rod.
During production, constantly observe whether the annealing current
of wire drawing is normal, especially when it is just started, pay
special attention to the change of annealing current, and adjust
the size of annealing current according to the change of wire
speed, so as to make the annealing current gradually increase with
the increase of wire speed and ensure the normal operation of the
equipment.
I believe that as long as the above points are controlled in the
actual production, the quality and production efficiency of copper
wire drawing products will be improved to varying degrees, so as to
provide a strong production guarantee for the next process better
and faster.
| Item | Specs |
| Inlet wire range | 0.8 mm to 1.2 mm |
| Outlet wire range | 0.08 mm to 0.32 mm |
| Production speed | Max 2500 m/min |
| Block No. | 24 |
| Dimension of blocks | Φ25mm x 8 - 13mm (thickness) |
| Wire drawing lubrication | Spray type |
| Take up capacity | Max 50 kg |
| Main motor power | 15kW-4P AC motor |
| Take-up motor power | 4kw-4P / 5.5kw AC motor |
| Take-up reel | 300 mm |
| Power supply | 380V to 480V, 50Hz or 60Hz |
| Machine size | L2800 x W1500 x H1650 mm |
| Machine weight | 2250 kgs |
Download Center
Manual of Machine Purchase
Packing,
Shipping, Quality & Service, FAQ etc.pdf
Our Company
Dongguan Wiremac Machinery Equipment Co., Ltd. Is located in Houjie
Town, a famous historic town in China. Our company is a wire and
cable equipment manufacturer integrating R&D, processing,
assembly, commissioning and after-sales.
The company is committed to copper wire, copper clad steel, copper
clad aluminum and other metal wire deep processing and research,
with a variety of high quality machines: micro wire drawing
machine, fine wire drawing machine, fine wire drawing machine with
continuous annealing, medium fine wire drawing machine,
intermediate wire drawing machine, intermediate RBD wire drawing
machine and copper rod breakdown machine.
Our company provides a complete set of wire processing solutions
for customers, but also customize and design non-standard special
equipment according to the requirements of customers.
Our company upholds the spirit of “Honesty-based, Quality-based”
enterprise, and continue to research and develop innovation and
development, with professional skills and standardized pragmatic
management, in line with the “High-quality and High-efficiency”
business philosophy, from the overall planning, staff training,
installation and commissioning, after-sales service, to provide
customers with better and more satisfactory products and service.
Our Workshop
FAQ
1. Q: Are you manufacturer or trading company?
A: We are a manufacturer.
2. Q: What info you need before you make the proposal?
A: The input & output wire diameter, spool size, application, 3
phase voltage & frequency, annealing or not, and your other
requirement.
3. Q: How can I trust you and make a payment to you?
A: (1) We are an audited supplier by international SGS, with its
certificate. They approve that we are an original manufacturer and
meet their standard.
(2) We are a member of Made in China, who is always responsible for
all customers.
(3) Please visit us and check our factory by video, and request
necessary documents from us.
4. Q: I have no experience buying something abroad. What can I do?
A: We will guide and show you how to do the importation, you can
also seek help from your local agency.
5. Q: Do you provide installing and debugging overseas?
A: Overseas machine installation and worker training services are
available.
6. Q: Can you make the machine according to my design or prototype?
A: Yes, we have an experienced team for working out the most
suitable design and production plan for the machine that you are
going to book with us.
7. Q: How does your factory do regarding quality control?
A: There is zero tolerance to poor quality. Quality control
complies with SGS & ISO 9001. Every machine has to past testing and
trial running before it's packed for shipment.
8. Q: How can I trust you that machines pasted testing and trial
running before shipping?
A: 1) We record the testing videos for you, and every necessary
photos for you.
2) We welcome you to visit us and test machine by yourself in our
factory.
9. Q: What about our after-sale service?
A: We provide technical support on line as well as overseas
services by skillful technicians.
10. Q: What should I do if I just start a new business?
A: Contact us immediately, we provide free consultant pre-sales
service. Also we can help you with material purchase, worker
training, etc.
11. Q: Can I visit you factory to check machines on-site? What
Should I bring when I visit your factory?
A: We are manufacturer, and welcome customers to visit us. For
special product design, you are suggested to bring some samples,
you can test it with our machines on-site.
12. Q: Can I use my own logo?
A: No problem, please inform us.
